Quantum ATL M1500, User Manual

Page: 103 / 222

Chapter 5 Running Diagnostic Programs
Running the Move Location Test
ATL M-Series User’s Guide 85
test cycles. The home location depends on whether the destination is a
tape drive or a magazine slot:
• If the destination is a tape drive, the home location is slot 1 of the
level 1 left magazine.
• If the destination is a magazine slot, the home location is the first
installed tape drive.
To run the
Move Location
test:
1
Access the
Diagnostics Menu
screen (see Accessing the Diagnostics
Menu Screen on page 77).
2
Press the
Up
and
Down
buttons to select
General
.
3
Press
Select
.
The GUI displays the
Diags: General
screen (see figure 48 on page 79).
4
Press the
Up
or
Down
buttons to select
Move Location
.
5
Press
Select
.
The GUI displays the
Diag: Move-Location
screen (see figure 54 ).
Figure 54 Sample
Diag: Move-Location
Screen
6
Press the
Up
and
Down
buttons to select the destination for the robotic
hand.
7
Press
Select
.