12
Installing the 3U Rackmount Enclosure in a Rack
LTO-5 Full-Height Tape Drive
Figure 12 Attaching the
Spring-loaded Rails
Back
of
ra
ck
F
ront of
rack
5
Repeat steps 4 and 5 for the second spring-loaded rack rail.
6
From the back of the rack, align the cable reel with the hole in the right spring-
loaded rack rail and secure it with an M6 x 1.0-12L Phillips screw (see
Figure 13
).
Figure 13 Attaching the
Spring-loaded Rails
Cable reel
7
Tighten the thumbscrew into the spring-loaded rack rail.
8
From the back of the rack, align the cable rack bracket with the hole in the spring-
loaded rack rail and secure it with an M6 x 1.0-12L Phillips screw (see
Figure 14
).