Quantum Networks QN-I-270, Quick Setup Manual, Page: 7 / 17

7
Step 3- Setting up device IP address
Click “ Configure
“and set the device IP address by selecting the required options.

Connectivity Mode – Ethernet / USB

Protocol - DHCP, Static or PPPoE

Interface – Select interface

VLAN Assignment- Enable parameter. Enter VLAN ID and click “Fetch IP Address” to
get the respective IP in case of VLAN setup is required.
Figure 3
Click
“Proceed “to apply configuration and turn to the next page.
Step 4 – Set the management mode
Management Mode
Quantum® Networks Access Point can be configured in two modes:
RUDDER (on cloud / on-premise)
Centralized management of Access Points using Quantum® RUDDER
Standalone
Independent management of each Access Point