Appendix
QDI
50
A. Using CBLOGO.EXE Utility (Under DOS ):
1.
Copy CBLOGO.EXEand AWDFLASH.EXE from the directory \Utility located on
QDI Driver CD to your hard disk.
2.
Get the BIOS file from AWDFLASH.EXE or Download the BIOS file from the
Website (http://www.qdigrp.com) and copy the BIOS file(xxxxxx.bin) to your hard
disk.
3.
Boot the system into DOS environment, Put your favor picture into BIOS file by
CBLOGO.EXE command. For example: CBLOGO.EXE xxxxxx.bin myphoto.
bmp
4.
Flash the BIOS to motherboard by AWDFLASH.EXE.
For example: AWDFLASH xxxxxx.bin
B. Using QFlash (Under Windows ):
1.
Download the QFlash Utility from the Website (http://www.qdigrp.com) or get it
from QDI Driver CD.
2.
Run QFlash program step by step,following the directions until complete it .
3.
Reboot the system, you can see the new picture displayed on the screen.
!
!
!
!
!
Note:
1. If you require more parameters information concerning
“CBLOGO.EXE”, please refer to the online help. If you don’t
prefer the logo displayed on the screen during bootup, set
the “Show Bootup Logo” option as Disabled in CMOS Setup.
2. We reserve the right of modifying the default full-logo of
QDI without further notification.
KD7Xen2.p65
02-9-10, 11:43
50
