13
Chapter 2
Chapter 2
Chapter 2
Chapter 2
Chapter 2
K7S746FX
K7S746FX
K7S746FX
K7S746FX
K7S746FX
Wake-Up On LAN (WOL1)
(Only for extend PCI LAN adapter supports the WOL function. On-board Lan need not
connect to the connector)
Through the Wake-Up On LAN function, a wake event occurring from the network can
wake up the system. If this function is to be used, please be sure an ATX power supply
of which 5VSB line is capable of delivering current at least720mA, and a LAN adapter
which supports this function is used. Then connect this header to the relevant connec-
tor on the LAN adapter, set “Ring power up control” as Enabled under the sub-section
“PM Wake Up Events” in the “POWER MANAGEMENT SETUP” section of the CMOS
SETUP. Save and exit, then boot the operating system once to make sure this function
takes effect.
S/PDIF Output Connector(JP31)
The S/PDIF (Sony/Philips Digital Interface) output connector allow your digital audio
output to the SPDIF_in on the external speaker.
GND
WOL1
Signal for waking up
+5V Standby
GND
1
JP31
+5V
S/PDIF
1
