Quantum Data 881 User Manual Download Page 375

Page: 375 / 1144

882 Video Test Instrument User Guide

(Rev A.35)

3. Press the

Options

key. The following information appears on the 882’s display.

4. Choose the

EDID Formats

item by pressing the adjacent soft key. A + appears next to

EDID Formats, indicating it is enabled.

The 882 loads the Source list with formats supported by the connected display

(hot-plug formats read via EDID structure of attached display).

5. Press the

Content

key. The following information appears on the 882’s display.

6. Select an image suitable for testing the display type (such as

Master

) by pressing the

soft key adjacent to the image.

Alternatively, to select the image using the command line interface, enter the following

command:

IMGL

Master

IMGU

7. Press the

Source

key and select a format beginning with SVD by pressing the adjacent

soft key.

8. On display under test, verify format displays image properly.

9. Repeat steps 7 and 8 to test each SVD format.

Note: Always make sure the 882 is using the lastest firmware.

-EDID Formats

CDF

+HP Bypass
-Emulate

Acer1

Acer2

Acer3

Acer4

Acer5

Acer6

Acer7

Acer8

Summary of Contents for 881

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 881

Reviews:

Related manuals for 881

Brands by name

Popular brands

Quantum Data 881, User Manual

Search results

Summary of Contents for 881

Reviews:

Related manuals for 881

Brands by name

Popular brands