Setting System Communication Parameters
The 9520 comes with a standard RS232 serial port and USB port. The unit will
not respond to computer commands unless these ports are properly configured.
Interface:
RS232, USB, Etherenet (optional)
Baud Rate:
Selects the baud rate for the selected interface.
Echo:
Selects whether to echo characters back to the host
computer or not.
Address:
Sets the GPIB address.
Setting Keypad Parameters
The rate at which a key will repeat itself when held down may be set. This can
be used to provide a controlled rate at which a parameter is incremented. In
addition, the volume of the beep can be controlled for both the keypad and the
adjustable knob.
Key Rate:
Sets the rate at which the keys will repeat when held
down.
Key Vol:
Sets the beep volume for the keypad.
Setting the Auto Start Mode
The unit may be configured to automatically start generating pulses after power
up.
Setting the Display Decimal Mark
Mark:
Selects the format of the decimal mark, . or , .
Setting the Display Brightness
LCD
Adjusts display brightness.
C om m.
P arameters
C o mm.
P arameters
K eypad
P arameters
Misc.
P arameters
Interface: RS 232
Interface: US B
K ey Repeat Rate
A uto Start
B aud Rate
K ey Volume
D ecimal Mark
E cho E nable
K nob Volume
LC D B rightness
System Menu
