Figure 1: Digi Device Discovery utility displaying Digi module
discovered on the LAN.
From this point, a web interface can be opened, allowing access to configura-
tion options for the Digi module. If you are required to enter a username and
password, they are as follows:
Username: root
Password: dbps
If a static IP address is desired, this change can be made from the web inter-
face. Please note, however, that if the IP address is changed such that it is
incompatible with the LAN, all communication including access to the module s
settings (including the IP address!) will no longer be possible over the LAN. If
this happens, a crossover cable must be used to access the Digi module s
settings (again using Digi Device Discovery). Temporarily set the pc s IP ad-
dress to be compatible with the Digi module s IP address to get the pc and
pulse generator to see each other over the crossover cable.