background image

Instruction Manual

• Installation Instructions / Owner’s Manual •

Due to continuous improvement of the product the Specifications are subject to change without notice.

LIMITED WARRANTY

 

QUANTUM AUDIO  warrants  any  products  purchased  in  the 

U.S.A. from an authorized QUANTUM AUDIO dealer. All products are 
warranted to be free from defects in material and workmanship under 
normal use and service for a period of (1) year when the unit is installed 
by  an  authorized  QUANTUM  AUDIO  dealer.  Non-authorized  dealer 
installed products carry a one (1) year parts and labor limited warranty. 
This warranty applies to the original purchase only.

 

QUANTUM AUDIO will either repair or replace (as its option) 

any  unit  that  has  been  found  to  be  defective  and  under  warranty 
provided the defect occurs within:
 
 

One (1) year if purchased through an authorized QUANTUM 

AUDIO dealer.

 

This limited warranty does not extend to units that have been 

subjected  to  misuse,  abuse,  neglect,  or  accident.  Products  that  in 
QUANTUM AUDIO’s judgment shows evidence of having been altered, 
modified, or serviced without QUANTUM AUDIO’s authorization, will be 
ineligible under this warranty.
 

To obtain warranty service please contact your retailer or see 

our web site at www.quantumaudio.net  for more details.

COZMIK SERIES AMPLIFIERS

QCA4400  QCA2500D  QCA3500D

QCA4500D

DB Research L.L.P. 

302 Hanmore Industrial Parkway // Harlingen, TX 78550

ph: 877.787.0101 // fx: 956.421.4513 // www.quantumaudio.net

®

Summary of Contents for QCA4400









Reviews: