![Quantronix Cubiscan 110-XT Operation And Technical Manual Download Page 35](http://html1.mh-extra.com/html/quantronix/cubiscan-110-xt/cubiscan-110-xt_operation-and-technical-manual_3466065035.webp)
Operation
Measuring and weighing using the touchscreen
Cubiscan 110-XT
25
Measuring and weighing using the
touchscreen
All controls, displays, and results for the Cubiscan 110-XT are located on
the freestanding touchscreen.
L=
W=
H=
These display the measured dimensions in inches (in) or centimeters (cm)
for instructions on selecting
measurement units.
Wgt=
This displays the measured weight in pounds (lb) or kilograms (kg) as
for instructions on selecting measurement
units.
Dwgt=
This displays the dimensional weight in pounds (lb) or kilograms (kg) as
selected. See
for instructions on selecting measurement
units.
Factor=
This displays the dimensional factor currently being used to calculate the
dimensional weight. This option can be turned on or off.
Ready (indicator)
When the green square indicator is lit, this indicates that the Cubiscan
110-XT is ready for cubing and weighing.
->0<- (indicator)
When the green square indicator is lit, this indicates that the scale platform
is empty and ready to receive a package. This indicator must be lit before
you can place a package on the platform. When you place a package on
the platform, the indicator goes off.
Figure 18
Cubiscan 110-XT touchscreen