Configuration
System configuration
Cubiscan 110-XT
33
backwards compatible with the Cubiscan 100. When the expanded
protocol is enabled it includes, among other things, the packet number,
date and time, length, width, height, weight, dimensional weight, the
dimensional factor, and barcode information.
This option must also be enabled when enabling a barcode scanner.
Password
This field displays the current password.
To set a password, tap the digits displayed in the password field. Enter your
preferred password. When the Cubiscan 110-XT is first turned on the
password must be entered before access is granted to the Configure,
Calibrate, and Diagnose menus.
If the password is set to all zeros, no password is required to access the
Cubiscan 110-XT.
Units
This section discusses the options available on the
Units
menu. Complete
the following steps to access the units menu.
1. From the home screen, tap
CONFIGURE
.
Figure 25
Home screen
