Quantifi Photonics 1000 Series, User Manual, Page: 40 / 59

Automated Optical Switch | Switch 1000/1100/1400 Series
Quantifi Photonics Ltd. Version 3.04 40
9 Programming guide
Introduction
Remote communication with the CohesionSCPI service is achieved through the Standard Commands
for Programmable Instruments (SCPI). Support for VISA I/O API over TCP/IP is provided by the VXI-11
compliant CohesionSCPI service. With VISA communication drivers installed on the client, the
implementation of VISA programming within environments such as MATLAB becomes available.
This guide provides general information on the commands available to communicate with the
CohesionSCPI service remotely using the VISA I/O.
On PXIe modules you can use the SCPI Command Console in CohesionUI (refer 7.6 SCPI Command
Console (available on PXIe modules)).
On MATRIQ instruments you can use the SCPI Command Console that you can access from the
Cohesion Operator (refer 0