Quantifi Photonics 1000 Series, User Manual, Page: 46 / 59

Automated Optical Switch | Switch 1000/1100/1400 Series
Quantifi Photonics Ltd. Version 3.04 46
In Multi chassis mode, all the commands given above in the Specific Command Summary will still work,
but they must be prefixed with
:CHASSIS<c>
.
Common command example:
Single Chassis Mode :SLOT2:IDN?
Multi Chassis Mode
:CHASSIS1:SLOT2:IDN?
Specific command example:
Single Chassis Mode
:SOUR2:CHAN2:POW? MAX
Multi Chassis Mode :CHASSIS1 SOUR2:CHAN2:POW? MAX
Changing the CohesionSCPI service Chassis Mode will rediscover all Chassis and installed
modules.
Command :SYSTEM:CHASSIS
Syntax
:SYSTEM:CHASSIS<wsp>[SINGLE|MULTI]
Description Set the Chassis Mode configuration
Parameters
SINGLE: Set CohesionSCPI service to operate in SINGLE Chassis Mode
MULTI: Set CohesionSCPI service to operate in MULTI Chassis Mode
Response No response
Example
:SYSTEM:CHASSIS SINGLE