I
NSTALLING
H
ARDWARE
I
NSTALLING
A
SAS M
EZZANINE
A
SSEMBLY
2-28
3. Disconnect the linking board from the mainboard connec-
tor.
4. Remove the standoff(s) from the mainboard.
5. Gently flip the mezzanine card and disconnect SAS
cable(s) from the card.
Disconnecting Cable
6. Remove the mezzanine card.
Installing a SAS Mezzanine
Assembly
Prerequisite:
Remove the top cover. See
.
1. Locate the min-SAS connectors on mainboard. See
2. Removing the cabling of SAS 0-3 and SAS 4-7 from the
mini-SAS connectors on mainboard.
3. Connect the mini-SAS cable labeled SAS 0-3 with exten-
sible cable (DD0S4ETH900) to the mezzanine card, only
for SAS ports to 0 to 3.
4. Connect the mini-SAS cable labled SAS 4-7 to the mez-
zanine card.
Connecting Cable
Summary of Contents for STRATOS S400-X44E
