EN-3
SAFETY INFORMATION
Please read through the following
Safety Information
before you start using
the device.
• Before charging the battery, be sure that the power adapter complies with
the rating. Only use accessories specified by the manufacturer.
• Do not handle the device with wet hands while it is being charged. This may
cause an electric shock.
• Do not place the device on an uneven or unstable surface. The device may
fall over resulting in injury or the device may become damaged.
• Do not place the device or use it in an environment where it might get wet
such as from snow, rain, or being near water. Doing so could result in fire or
electric shock.
• Do not spill water or other liquids into or on the device.
• Do not place the device in direct sunlight or near a heating device.
• Do not use a pen or any sharp object to tap the screen.
• Do not place objects on top of the screen panel, as objects may scratch the
screen.
• Turn off the device in areas with a potentially explosive environment such
as gas stations or other similar areas. Sparks from these areas could cause
explosion or fire and result in injury or even death.
• The device may produce some heat during normal operation or charging. If
you feel the device is too warm, avoid sustained contact with exposed skin
otherwise this might cause discomfort, or eventually a burn.
• Do not disassemble or modify the device. Doing so may cause injury or
malfunction.
• Clean only with a soft cloth. If needed, dampen the cloth slightly before
cleaning. Never use abrasives or cleaning solutions.
• Always disconnect the device from an electrical outlet and power off before
cleaning the device.
• Refer all servicing to qualified service personnel. Servicing is required when
the device has been damaged in any way such as:
√
Power cord or adapter is damaged.
√
Liquid has been spilled into the device.
√
The device has been exposed to rain or moisture.
√
The device does not operate normally.
√
The device was dropped or the chassis is damaged.
