Common Operations
Frequency/Channel Mode Switch
● In main page, press F+3 key to switch between
Frequency Mode and Channel Mode.
●
Frequency Mode:
In this mode, the users could
manually input the RX frequency. Or you could
press Up/Down key to adjust the frequency by
step frequency. The parameter could be modifying
by menu. In this mode, the users could not input
TX frequency. You could set Frequency or
Direction of Offset Frequency to change the TX
frequency.
●
Channel Mode
:
Display the actual channel No..
In this mode, the users could manually input the
channel No.. Or you could press Up/Down key to
switch channel. The parameter could be modified
by menu.
Channel Save
●
In MR Mode, Channel Save is workable. You
could copy current channel to new channel.
● IN VFO Mode,And you should set the parameter
of RX Frequency, Frequency Deviation Direction,
Wide/Narrow Bandwidth, RX/TX CTCSS /DCS, TX
Output Power, Whether to Participate in Scanning,
DTMF code, Scrambler,etc. First Press
MENU→13→CH-001,then press MENU again to
enter the Channel Save. Choose he channel by
Up/Down Key. Or you could use Number Key to
input the channel No.. After that, you press MENU
key again, the LCD will show “SURE?”. And you
could press MENU key to Save the channel.
● When you select the Saved channel, if it show
CH-XXX, then the channel is saved. If it show XXX,
then the channel is empty.
Summary of Contents for UV-K5
