ELVIS +5V
User
Status
24V 2.0A
Ex24V
ELVIS +5V
User
Status
24V 2.0A
Ex24V
ELVIS +5V
User
Status
24V 2.0A
Ex24V
ELVIS +5V
User
Status
24V 2.0A
Ex24V
Set up the Hardware
STEP 4
Ensure that the NI ELVIS II power switch
is in the OFF position.
A
B
C
Place the handle on the front of the QNET
board over the bracket located on the front
of the NI ELVIS II.
Slide the PCI connector at the back of the
QNET board into the female connector on
the NI ELVIS II.
To set up the QNET Mechatronic Actuators, please read the following instructions carefully. For full details, see the
QNET Mechatronic Actuators User Manual.
Connect the NI ELVIS II power supply
to the back panel of the NI ELVIS II.
Use the NI ELVIS II USB cable to connect
the NI ELVIS Unit to your computer.
D
E
F
Connect the QNET Mechatronic Actuators
power supply.
PC
ELVIS +5V
User
Status
24V 2.0A
Ex24V
ELVIS +5V
User
Status
24V 2.0A
Ex24V
ELVIS +5V
User
Status
24V 2.0A
Ex24V
ELVIS +5V
User
Status
24V 2.0A
Ex24V
ELVIS +5V
User
Status
24V 2.0A
Ex24V
ELVIS +5V
User
Status
24V 2.0A
Ex24V
ELVIS +5V
User
Status
24V 2.0A
Ex24V
ELVIS +5V
User
Status
24V 2.0A
Ex24V
