Quick Start Guide:
QNET 2.0 Rotary Pendulum
Check Components and Details
STEP 1
Make sure your QNET Rotary Pendulum experiment includes the following components:
1
Additional Components Required
Install LabVIEW and Add-Ons
STEP 2
STEP 3
To complete your QNET Rotary Pendulum setup, you will also need the following hardware:
1. NI ELVIS II or NI ELVIS II
+
workstation
2. +5VDC / 5A, +15VDC / 2A,
-15VDC / 0.8A Power Supply
3. USB Cable
3
1
2
Make sure the following versions of LabVIEW™ and required add-ons are installed:
1. LabVIEW™ 2012 or later
2. NI DAQmx 9.5.5 or later
3. NI ELVISmx 4.4 or later
4. LabVIEW™ Control Design and Simulation Module 2012 or later
2
1. Quanser QNET 2.0 Rotary Pendulum board
2. 24VDC, 3.0A Power Supply
Note:
The QNET curriculum resources are
available for download at www.ni.com/qnets
Note:
All references to NI ELVIS II
in this guide apply to both NI
ELVIS II and NI ELVIS II
+
devices.
