3
SPECIFICATIONS
Table 3.1 lists the AC input requirements for the AMPAQ-PWM. The PWM output specifications are given in Table
3.2, and the general amplifier specifications are listed in Table 3.3.
AC Input Specifications
Value
Input Voltage Range
100 VAC - 120 VAC or
200 VAC - 240 VAC
Input Frequency Range
50 Hz - 60 Hz
AC Current Rating
3.75 A
Fuses
3.5 A, 250 V, 3AG Slow Blow
Protection Class
Class I
Table 3.1: AC Input Specifications
PWM Output Specifications
Value
Maximum Continuous Output Current
3.75 A
Maximum Peak Output Current
15 A
(Maximum duration approximately 2 seconds.)
Maximum Output Voltage
240 VAC
(Output voltage is dependent on the input voltage.)
Switching Frequency
20 kHz
Table 3.2: PWM Output Specifications
Caution:
Do not exceed the maximum PWM load ratings of 3.75 A continuous, 15 A peak, and 240 VAC.
AMPAQ-PWM User Manual
DRAFT - August 15, 2016