background image

Chapter 3 

 

QDSP-400 Series User’s Manual 

 

Chapter 3 

AMI BIOS Setup 

 

Overview 

This chapter provides a description of the AMI BIOS. The BIOS setup menus and 

available selections may vary from those of your product. For specific information on 

the BIOS for your product, please contact us. 

 

NOTE: 

The BIOS menus and selections for your product may vary from 

those in this chapter. For the BIOS manual specific to your product, please 

contact us.

 

 

AMI's ROM BIOS provides a built-in Setup program, which allows the user to modify 

the basic system configuration and hardware parameters. The modified data will be 

stored in a battery-backed CMOS, so that data will be retained even when the power 

is turned off.    In general, the information saved in the CMOS RAM will not need to 

be changed unless there is a configuration change in the system, such as a hard 

drive replacement or when a device is added. 

It is possible for the CMOS battery to fail, which will cause data loss in the CMOS 

only. If this happens you will need to reconfigure your BIOS settings. 

 

Summary of Contents for QDSP-400 Series







































Reviews: