background image

Preface 

11 

QDSP-2020 User’s Manual 

common carrier in transit. Returns for Warranty must include a Failure Report for 

each unit, by serial number(s), as well as a copy of the original invoice showing the 

date of purchase. 

To reduce risk of damage, returns of product must be in a Quanmax shipping 

container. If the original container has been lost or damaged, new shipping 

containers may be obtained from Quanmax Customer Service at a nominal cost. 

Quanmax owns all parts removed from repaired products. Quanmax uses new and 

reconditioned parts made by various manufacturers in performing warranty repairs 

and building replacement products. If Quanmax repairs or replaces a product, its 

warranty term is not extended. 

Shipments not in compliance with this Limited Warranty Return Policy will not be 

accepted by Quanmax. 

 

Limitation of Liability 

In no event shall Quanmax be liable for any defect in hardware, software, loss, or 

inadequacy of data of any kind, or for any direct, indirect, incidental, or 

consequential damages in connection with or arising out of the performance or use 

of any product furnished hereunder. Quanmax’s liability shall in no event exceed the 

purchase price of the product purchased hereunder. The foregoing limitation of 

liability shall be equally applicable to any service provided by Quanmax or its 

authorized agent. 

„

  Maintaining Your Computer 

Cleaning Components 

Internal fans cool the computer by drawing in air through air vents in the front of the 

computer and blowing it out the rear-side panels. Dust and other debris is drawn in 

with the air and, if allowed to build up, will interfere with the operation of various 

system components and insulate components, preventing heat from dissipating. To 

prevent this, an air filter has been installed in front of the air vents in the front panel 

to block dust and other debris from entering the computer. 

Dust and debris builds up on the air filter over time. When the air filter becomes very 

dirty, it is difficult for cooling air to pass through the air filter and enter the computer. 

So, the air filter must be cleaned to prevent the computer from overheating. Remove 

and clean the air filter on a regular basis following the steps described in the “Air 

Filter” section of Chapter 2. Also, regularly vacuum the exterior of the chassis to 

remove dust that has accumulated around the air vents. 

 

Summary of Contents for QDSP-2020





























Reviews: