Chapter 3
26
QDSP-1000/ 1010 User’s Manual
Windows Setup
============
Setup will load support for the following mass storage devices(s):
VIA V-RAID Controller Series(Windows XP/SRV2003)
* To specify additional SCSI adapters, CD-ROM drivers, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks form a amass storage
Device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER
S=Specify Addition Device ENTER=Continue F3=Exit
After the SATA controller driver installation is completed, you should see a screen
similar to below. It indicates that you have installed the SATA controller driver
successfully. You can proceed with the Windows 2000/XP installation.
Windows Setup
============
The following list shows the existing partitions and
unpartitioned space on this computer.
Use for UP and Down ARROW keys to select an item in the list.
z
To set up Windows XP on the selected item, press ENTER.
z
To create a partition in the unpartitioned space, press C.
z
To delete the selected partition, press D.
76317 MB Disk 0 at Id 0 on bus 0 on viamraid [MBR]
C: Partition [NTFS] 76317 MB <73627 MB free>
ENTER=Install D=Delete Partition F3=Quit
