Chapter 3
24
KUBE-8050/8051 User’s Manual
Chapter 3
Getting Started
Power Connection
DC Power
The product comes with a two pin header that carries 12VDC external power input.
Label Function
+
DC 12V
`
-
GND
CAUTION
Use the power cord suitable for the power supply in your country. Do not
remove or alter the grounding prong on the power cord. In situations where
a two-slot receptacle is present, have it replaced with a properly grounded
three-prong grounding type receptacle.
Operating System and Drivers
If your product does not come with an operating system pre-installed, you will need
to install an operating system and the necessary drivers to operate it. After you have
finished assembling your system and connected the appropriate power source,
power it up using the power switch and install the desired operating system.
You can download the drivers for the product from the Quanmax website at
www.quanmax.com
and install as instructed there. For other operating systems,
please contact Quanmax.
NOTE
When the system reboots without connecting the CRT, there might be no image on screen
when you insert the CRT/VGA cable. Please pressing <Ctrl>+<Alt>+<F1> simultaneously
to show the image on screen.
