Chapter 1
16
KPC-2150 Series User’s Manual
System tour
Refer to the diagrams below to identify the components of the system.
I/Os
Figure 1 I/Os
USB
The USB (Universal Serial Bus) port is compatible with USB devices such as
keyboards, mouse devices, cameras, and hard disk drives. USB allows many
devices to run simultaneously on a single computer, with some peripheral
acting as additional plug-in sites or hubs.
Power Switch
The power switch allows powering ON and OFF the system.
Ethernet
The eight-pin RJ-45 LAN port supports a standard Ethernet cable for
connection to a local network.
Power Input
1. Connect the supplied AC power cord to the system AC power inlet on the I/O
panel of the system.
2. Connect the other end of the AC power cord to a corresponding outlet.
HDMI
HDMI connector for display output
COM
D-Sub 9 pin connector for RS-232/422/485 connection
VGA
D-Sub 15 pin VGA connector for display output