background image

Preface 

11 

KPC-1920 User’s Manual 

 

Environmental Factors 

„

 

Temperature 

The ambient temperature within an enclosure may be greater than room 

ambient temperature. Installation in an enclosure should be such that the 

amount of air flow required for safe operation is not compromised. 

Consideration should be given to the maximum rated ambient temperature. 

Overheating can cause a variety of problems, including premature aging and 

failure of chips or mechanical failure of devices. 

If the system has been exposed to abnormally cold temperatures, allow a 

two-hour warm-up period to bring it up to normal operating temperature before 

turning it on. Failure to do so may cause damage to internal components, 

particularly the hard disk drive. 

 

„

 

Humidity 

High-humidity can cause moisture to enter and accumulate in the system. This 

moisture can cause corrosion of internal components and degrade such 

properties as electrical resistance and thermal conductivity. Extreme moisture 

buildup inside the system can result in electrical shorts, which can cause 

serious damage to the system. 

Buildings in which climate is controlled usually maintain an acceptable level of 

humidity for system equipment. However, if a system is located in an unusually 

humid location, a dehumidifier can be used to maintain the humidity within an 

acceptable range. Refer to the “Specifications” section of this user’s guide for 

the operating and storage humidity specifications. 

 

„

 

Altitude 

Operating a system at a high altitude (low pressure) reduces the efficiency of 

the cooling fans to cool the system. This can cause electrical problems related 

to arcing and corona effects. This condition can also cause sealed components 

with internal pressure, such as electrolytic capacitors, to fail or perform at 

reduced efficiency. 

 

Power Protection 

The greatest threats to a system’s supply of power are power loss, power spikes, 

and power surges caused by electrical storms, which interrupt system operation 

and/or damage system components. To protect your system, always properly 

ground power cables and one of the following devices. 

Summary of Contents for KPC-1920


























Reviews: