INSTALLATION GUIDE
The wall mount and leak sensing cable is intended to be used for small spaces, such as under
appliances.
Installation steps:
1. Remove the top cover, by holding the
CubicDetector in your hand, while
twisting the cover counter clockwise.
2. Pull out the battery insulator, the LED
should start blinking blue.
3. Put back the top cover in place.
4. Provide Wi-Fi and cloud credentials to
the device with either a smartphone
or a computer.
5. Only attach the wall mount if using
the leak sensing cable.
6. The device is now ready to be placed.
Internal view
Factory Reset:
1. Remove the top cover, by holding the
CubicDetector in your hand, while
twisting the cover counter clockwise.
2. Remove the battery.
3. Press and hold the reset button while
putting back the battery.
4. Release the button when the LED
starts blinking blue.
5. Attach the top cover, in reverse order
of removal. Turn the top cover until
the three notches align.
Wi-Fi Reset:
1. Remove the top cover, by holding the
CubicDetector in your hand, while
twisting the cover counter clockwise.
2. Press and hold the reset button for
10 seconds.
3. Release the reset button when the
LED turns purple.
4. The device will now be in pairing
mode and the LED should be blinking
blue.
5. Put back the top cover in place.
6. Provide Wi-Fi and cloud credentials to
the device with either a smartphone
or a computer.
Details are subject to change, check the latest version here.
The company is not liable for possible errors and/or misprints.
4 of 7
