QUAM-NICHOLS COMPANY
234 East Marquette Road, Chicago IL 60637
Phone: (800) NEED NOW Fax: (888) NEED NOW
(800) 633-3669 (888) 633-3669
E-Mail: [email protected] www.QuamSpeakers.com
Since 1930
© 2012 Quam-Nichols Company, Quam- Nichols reserves the right to make changes and/or improvements to its products at any time and without notice. T0104.5-SYS12 12-SE01
SYSTEM 12
Complete 2' x 2' class UL Listed Speaker System
Sealed and tuned enclosure, 25V/70V color coded leads
TILE REPLACEMENT LOUDSPEAKER ASSEMBLY
GENERAL DESCRIPTION
The SYSTEM 12 Series is a complete shallow depth, lightweight
loudspeaker assembly with an 8” O.D. loudspeaker with concentric
mount hard fi ber HF cone, multi-tap transformer, perforated steel
baffl
e and integral molded 1,411 CID fi ber enclosure. Cable clamp is
included; fi ve (5) seismic tie-off points. No assembly required.
Grille fi nish: Baked epoxy hybrid
SYSTEM COMPONENTS
Loudspeaker
8C5PAX
Transformer
25V/70V 5W-5 tap color coded leads
(5W, 2.5W, 1.25W, 0.63W, 0.31W)
MODELS GRILLE OPTIONS
SYSTEM 12
Standard Perf White
SYSTEM 12
/B
Standard Perf Black
SYSTEM 12/MP
Micro-Perf White*
SYSTEM 12
/
MP
/B
Micro-Perf Black*
Recommended construction sequences, installation instructions and A&E Specifi cations, EASE .GLL /.CFL data fi les are available
in various formats in the QUAM Architects’ and Engineers’ Resources section on the web at: www.QuamSpeakers.com
Average Sensitivity
92 dB-SPL 1W/1M
Loudspeaker Power Rating
12W-RMS EIA 426A Standard
Calculated Maximum
System Output
99 dB-SPL 5W/1M
Magnet Type
4.8 oz. BeFe Ceramic
Frequency Response
65 Hz-17 kHz EIA 426A Standard
Nominal Coverage Angle
100
°
included angle -6 dB/ 2 kHz
half space
Audio Connection
Pre-cut 7” color-coded leads
INTENDED USE
Indoor environment, mounted parallel to fl oor plane in a 24” wide suspend-
ed ceiling tile grid.
Program Material: Signal tones, voice and music
.
UL Listed 1480- (UEAY, UEAY7- Canada)
As a
General Signaling
device- When installed with supplied
installation instructions and requirements of NEC /AHJ.
CITY of CHICAGO
A PPROVED
Material and construction permits use where ceiling plenum is part
of the air handling system.
* These products have not been submitted to UL or City of Chicago
AUDIO SPECIFICATIONS
ACCESSORY
Kit #112
One 24” “T”-bar, white. Use with 2 ’x 2’ Tile
Replacement Loudspeaker in a 2’ x 4’ ceiling tile
91H1
IBEW
1031
LU
.GLL / .CLF
DATA
i
Average Sensitivity
92 dB-SPL 1W/1M
AUDIO SPECIFICATIONS
Standard Perf
Micro- Perf
Shown as 1" square samples