XLS Library Site Planning Guide
4-1
4
Installation Check List
This chapter provides a check list of the components, options, and accessories needed to
install an XLS tape library. For more information, refer to the
XLS Library Installation
Manual
.
After the XLS order is placed, Qualstar builds the library to the requested specifications
and preinstalls the drive bays, cartridge slots, I/O ports, Host Bus Adapters (HBAs), and
the power supplies. The tape drive assemblies, and the cartridges must be installed at the
customer’s site.
provides an annotated check list of XLS components, options, and accessories,
so you can ensure all required parts are available before starting the installation.
Important:
Before starting the installation, obtain any planning
diagrams or documents created when determining what
XLS equipment to order. You can refer to these
documents as you install the tape drives and cartridges,
connect the SCSI or Fibre Channel cables, and configure
the logical libraries.
4
Item
Provided
by
Notes
LRM
Qualstar
Built and pre-tested to customer specifications; includes
variable number of drive bays, I/O ports, power supplies,
and HBAs.
MEM
Qualstar
As an option, one XLS-85000 MEM2 can be attached to
the left side of the LRM.The MEM2 is shipped separately
and installed at the customer’s site.
Expansion pods
Qualstar
As an option, one expansion pods can be attached to the
left side of the LRM. The expansion pods are installed at
the factory or at the customer’s site.
Tape drive assemblies
Qualstar
The tape drives are installed in drive carriers at the
factory and are shipped separately.
Drive filler assemblies
Qualstar
All unused tape drive locations require drive filler
assemblies, which are shipped separately.
Terminators for SCSI tape
drives
Qualstar
A terminator is included with each SCSI tape drive.
I/O port magazines
Qualstar
Additional I/O port magazines and covers are available
for long-term cartridge storage.
Table 4-1
Installation check list
Summary of Contents for XLS-810160
Page 1: ...XLS 810160 XLS 810240 Tape Libraries Site Planning Guide Document No 501804 Rev 07 01 19...
Page 6: ...Table of Contents vi 501804 Rev 07 01 19 Notes...
Page 10: ...1 1 About the XLS 1 4 501804 Rev 07 01 19 Figure 1 3 LRM with one MEM2...
Page 22: ...3 4 Cooling Requirements 3 10 501804 Rev 07 01 19 Notes...
