2.
Reconnect the power cord and turn on the TLS power.
3.
Follow the instructions in Section 5.3.1 to enter
Update
as the password.
4.
Follow the instructions in Section 9.2.3 to reconfigure the TLS.
9.2.3 Reconfiguring the Model Number
NOTE
If the TLS is restricted, it may not be possible to change the TLS model number in the
Configuration\Advanced\Changer\Mechanics
menu. See Section 5.1 for details
about restricted units.
1.
Press the MENU key once to display the
Top Menu
, with the pointer in the left
margin of the LCD pointing to
Configuration
.
2.
Press the ENTER key to enter the
Configuration
menu.
NOTE
See the TLS-4000 Installation and Operation Manual (Qualstar document number
complete details about the
Configuration
menu.
3.
Press the ENTER key to enter the
Configuration\Advanced
menu.
4.
Press the ENTER key to enter the
Configuration\Advanced\Changer
menu.
5.
Press the (DOWN) key repeatedly to move the pointer to
Mechanics
,
then
press the ENTER key to enter the
Configuration\Advanced\Changer\
Mechanics
menu. If necessary, press the (DOWN) key to move the pointer to
Model.
6.
Make sure that the cabinet door is open, then press the ENTER key to begin ed-
iting the model number.
7.
Press the (UP) or (DOWN) key repeatedly to change the model number to
match the new hardware configuration (e.g. from
TLS-4440
to
TLS-4480
).
8.
Close the cabinet door. (The Carriage remains stationary.)
9.
Press the MENU key, then press the EXIT key to exit the menu system. (The
display indicates that the unit must be recalibrated.)
Press the MENU key to return to the
Top Menu
.
501380 Rev. B
TLS
Expansions
9-11
