FRONT
Upper Carousel Pivot
Upper Carousel Bearing
Upper Carousel Pivot Support
Upper Carousel Bearing
Lower Carousel Bearing
Carousel Gear Guard
Carousel Gear
Mounting Screws (4)
Motor Cable
Carousel Motor Shaft Gear
TLS Midplate
Figure 7-37 A Carousel Assembly
8.
Disconnect the Carousel Motor cable from the Carousel PCBA (Figure 7-35).
9.
For TLS models 4660 and 46120, remove any nylon cable ties that are attached
to the motor cable (Figure 7-38).
REAR VIEW
TLS Midplate
Carousel Motor
Cable Connector
Carousel Motor
Nylon Cable Tie
Figure 7-38 Carousel Motor Nylon Cable Ties – TLS Models 4660 and 46120
NOTE
For TLS models 4660 and 46120, the Carousel Motor is mounted in the right side of the cabinet
(as seen from the front). For all other TLS models, the Carousel Motor is mounted in the left side
of the cabinet.
501380 Rev. B
Field–Replaceable Units (FRUs)
7-59
