HOW TO INSTALL
195mm
294mm
40mm
back
1. Install Fly trap at a height of 1.8 to 2 meters
from the floor, near a plug socket and avoiding
direct sunlight.
2.Drill three holes with 5mm bit, depth 28mm.Insert
swell plastic buttons into the holes (screw hole
facing out)
3. Screw the tapping screws into the wall
plugs leaving 5mm of the screw sticking out to
hang the fly trap on.
4. Hold the fly trap on both sides and align the
mounting holes with the screw and hang the fly
trap. Install the covering caps on top two screws.
WARNING
1.This fly catcher is for indoor use ONLY.
2.
Installing the Fly trap under strong light (Lamps or sunlight) will lessen the effect.
3.
Avoid installing the fly trap in dusty, windy or in high humidty environments.
Handle
of
sticky
paper
holder
LOCK
UNLOCK
HOW TO USE
1.Press lock on the panel & unlock it.
2.Lift up the front cover in certain angle, hook the
supporter onto the supporter post.
3. Push the handle of the sticky paper holder
slowly until the handle makes contact with the
electrical box.
4.Remove the coating from a new sticky paper, insert
it to sticky paper holder by aiming for the guide slot
5. Pull the handle of the sticky paper holder
slowly upwards until you hear the click. Hold the
panel and remove the supporter from the post
and slowly lower the panel and push to lock it
closed.
6. Plug the fly catcher in and it will start to work.
Tips
During Winter or when there are not many flies in your environment, it is recommended to replace the
sticky paper every second weed.
During Summer or when there are many flies in your environment it is recommended to replace the
paper weekly.
If more than 2/3 of the paper is covered in flies, it is recommended that you replace the paper
Dusty areas will effect the tackiness of the paper and will therefore need to be replaced more often.
Stick
y pap
er
Sticky
paper
Lock
Covering
cap
Supporter
Supporter post
Front Cover
3
4
Electrical
box
★
★
★
★