Quality Heating 3060-150, Manual

Page: 8 / 15

specification
Type 3060-150
Size 600*300*7mm
Volt 230V AC , 50HZ
Power 40 ~ 150W
Temperature Max 80°C
Application temperature range -35°C ~ +30°C
•
Do not bend, cut, puncture, or pierce the heat plate
•
Clean the surface to be glued: free of grease and dust
•
Remove the protective film from the adhesive film on the back of the
heatplate
•
Glue the heat plate to the cleaned surface
•
The infrared heat plate is only to be used for the intended purpose as a
radiant heater
•
Use at the workplace, such as desks, cash registers and sales areas, etc
•
The heat plate should be placed in such a way that people cannot touch
the plate unintentionally,this is especially true for chidren and pets.
•
If there is visible damage to the heat plate, the power cord or the rotary
dimmer,it must no use again
•
No operation of the heat plate under adverse environmental conditions*
•
*Wet or high humidity
•
*Dust and combustible gases,vapors or solvents
•
Any use other than that previously described is not permitted and is likely
to damage
•
E.g. short circuit,fire, electrical,shear blow etc