6
A S S E M B LY I N S T R U C T I O N S
Please DO NOT fully tighten the KD screws
until all panels are assembled.
NOTE: Each plastic connector is pre-assem-
bled (pre-drilled) on the specific panels with
2 screws. If the KD screw(s) do not fit during
assembly, loosen the 2 (pre-drilled) screws
to adjust the plastic connector until the KD
screws are able to be installed. Tighten all
KD screws once all panels are assembled.
Step 1: Attach 8 plastic connectors [X] to left
side panel [G] and Right side panel [F] with
16 KD screws (2 screws for each connector).
Attach 2 plastic connectors [X] to Left front
panel [D] and Right front panel [E] with 4 KD
screws. Attach 2 wood connectors [P] to
front panel [C] with 4 KD screws (2 screws
for each connector). Attach 2 plastic connec-
tors to front panel [C] with 2 KD screws; 1
KD screw for each connector. Voir fig. A.
Fig. A
Step 2: Attach left side panel [F] to left front
panel [D] with 2 KD screws. Attach right
side panel [G] to right front panel [E] with 2
KD screws. See Fig. B.
Fig. B
Step 3: Attach left front panel [D] and left
side panel [F] to Base [B]with 2 KD screws.
Attach right front panel [E] and Right side
panel [G] to base [B] with 2 KD screws. See
Fig. C.
Fig. C
Step 4: Attach front panel [C] to left front
panel [D] and right front panel [E] with 2 KD
screws. See fig. D.