Qualitel Symphony, Instruction Manual

Page: 5 / 12

4
GETTING STARTED
1. The telephone requires 3 × 1.5V AA batteries. Open the battery compartment cover and
insert the batteries in the right polarity, then close the cover (use alkaline batteries). The
time should be displayed on the liquid crystal display after the batteries are inserted.
2. Insert one end of the line cord into the connector marked “line” on the base and the other
end to the wall outlet.
3. Connect one end of the curly cord to the telephone handset and the other end to the base of
the telephone.
4. Set the dialing mode to PULSE or TONE depending on your service provider requirements.
5. Subscribe for Caller ID service from your service provider. Check with your service provider
for details and availability.
NORMAL USE
RECEIVING A CALL
From the handset
1. Pick up the handset and talk to the other party.
2. To end the call, return the handset to the base.
Switching to speakerphone while on a call
1. When using the handset, press key and return the handset to the base.
2. To end the call, press key again.
From speakerphone
1. When the telephone rings, press key and talk to the caller.
2. To end the call, press key again.
Note: Caller ID transmits the incoming message between the first ring and the second ring.
Answer phone after the second ring if you wish to view the caller’s identity before answering the
call.
MAKING A CALL
From the handset
1. Pick up the handset.
2. When you hear dial tone, dial the desired number.
3. The phone will start to time the conversation after 6 seconds.
4. To end the call, return the handset to the base.
From Speakerphone
1. Press key
2. When you hear dial tone, dial the desired number.
3. The phone will start to time the conversation after 6 seconds.
4. To end the call, press
key again.