Qualitel QT6206B, Instruction Manual, Page: 7 / 9

7
3. Press the
RD
key, the number will be dialed out automatically.
¾
Deleting outgoing Call number
1. In on-hook or off-hook state, press the
OUT
key to review the stored number.
2. Press the
DEL
key to erase the LCD displays the next number.
NOTE:
Press the
DEL
key for 3 seconds, all the outgoing call numbers will be erased.
MENU SETTINGS
SETTING DATE AND TIME
1. In on-hook state, press the
SET
key, the LCD displays
SET 1 DATE
.
2. Press the
SET
key once again, the last two digits of the year flashes.
3. Press ▲ or ▼ key to edit the year then press the
SET
key to confirm. Follow the same procedure to set the
month, date, hour and minute.
4. Press the
DEL
key to quit.
NOTE: Month: 1-12 Date: 1-31 Hour: 00-23 Minute: 00-59
.
SETTING LOCAL AREA CODE
1. In on-hook state, press the
SET
key and then press ▲ key, the LCD will display
SET 2 CODE
2. Press the
SET
key again, the LCD displays
CODE -----
3. Press ▲ or ▼ key to set the first digit of the local area code.
4. Press the
SET
key to confirm and to advance to the second digit setting, follow the same procedure to set
further 3 digits.
5. Press the
DEL
key to quit.
EXAMPLE:
If the local area code consists of only 4 digits, the last digit can be left as “-”.
After entering the local area code, the phone will automatically filter the area code should the incoming call match
the set area code and display only the telephone number without the area code.
SETTING PABX CODE
1. In on-hook state, press the
SET
key and then press ▲ key twice, the LCD will display
SET 3 PCODE
.
2. Press the
SET
key to confirm, the LCD displays
PCODE --
, the first “-“flashes indicating the first digit setting of
the PABX code.
3. Press ▲ or ▼ key to set the PABX code. Press the
SET
key to confirm and advance to the second digit setting.
4. Follow the same procedure to set the second digit.
NOTE:
1. This feature is useful when operating the telephone on a PABX line extension.
If the PABX code is set the telephone will automatically add the PABX code ahead of the telephone number
when dialing back incoming call numbers or when dialing a telephone number in pre-dial mode. A second
pause is also automatically entered between the PABX code and the number to be dialed.
SETTING DIALING MODE
1. In on-hook state, press the
SET
key and then press ▲ key four times, the LCD will display
SET 5 P-T
.
2. Press the
SET
key to confirm; the LCD displays
TONE
, press ▲ or ▼ key to select
T
(TONE) or
P
(PULSE).