State of the art telecommunication products
ring type, the default ring will be used.
Handset Volume
Set the Handset volume, the value must be 1~9
Headset Volume
Set the Headset volume, the value must be 1~9
Headset Ring Volume
Set the ring volume in the headset, the value
must be 1~9
Speakerphone Volume
Set the speakerphone volume, the value must
be 1~9
Speakerphone Ring Volume
Set the ring volume in the speakerphone, the
value must be 1~9
Headset Volume Offset
This is to adjust the base volume of the headset.
Please note when set the volume at the
maximum level it may create noise and
decrease the echo canceller.
Headset Mic Offset
This is to adjust the base volume of the headset
Mic.
G.729AB Payload Length
Set G729 Payload Length.
G.723.1 Bit Rate
5.3kb/s or 6.3kb/s is available
G.722 Timestamps
160/20ms or 320/20ms is available
DTMF Payload Type
Enter the DTMF payload type, the value must be
96~127.
Enable VAD
Enable Voice Activity Detection. When enabled,
the device will suppress the audio transmission
with artificial comfort noise signal to save the
bandwidth.
Enable MWI Tone
The phone will play MWI tone when a new MWI
Comes
Auto Answer By Headset
When this item is checked, the device will
auto-answer phone calls by headset if the
auto-answer or intercom is enabled.
8.18
PHONE / MCAST
This feature allows user to make some kind of broadcast call to people who are in multicast group.
