3
4
Preparation
Connect the Horizontal Frame Pieces
3
Unwrap the
Frame Pieces
, and lay
them out carefully.
Then flip the
Frame Pieces
, so the metal
surface is facing upward.
The red arrows on the frames indicate
how many
Fabric Tensioners
to insert for
each
Frame Piece
. Repeat these steps
for all the
Frame Pieces
.
Line up the non-angled frame
ends of the
Horizontal Frame
Pieces
and slide the
Center
Joint
in the middle to connect
them.
Secure the
Horizontal Frame Pieces
with the
Frame Screws
using the
Allen Key
. Repeat these steps for the
other two
Horizontal Frame Pieces
.
Make sure that the assembly
area is clean and clear of debris
and sharp objects. At least two
feet of extra space is required
on all four sides when the
screen is spread out.
1
Unpack all the parts in the
box, but do not unroll the
Screen Fabric
yet.
IMPORTANT
Hardware is stored in a
separate box. Do not discard
this box!
2
Allen Key
Frame Screw
Fabric Tensioner
Fabric Tensioner
Horizontal Frame
Vertical Frame
4
Center Joint
Horizontal Frame
5
Before connecting the corner
Frame
Pieces
, slide the
Fabric Tensioners
into
the track of the aluminum frame.
Place the Fabric Tensioners
The red arrow stickers specify
approximate locations of where
the Fabric Tensioners need
to be placed. Each arrow corresponds
to one opening on the screen fabric.
Hardware Box
Center Joint
QualGear logo is
on the bottom right
Frame Piece.
