5
M-L
M-B
M-J
M-A
Attach the adjustable extension column to the ceiling plate with four M6 screws (M-B)
and four D6 washers (M-L) using a 5mm Allen key (M-N) as shown below.
Insert the pivot bracket into the end of the inner extension column and secure with four
M5 screws (M-A) and four D5 washers (M-J) using a 4mm Allen key (M-M) as shown below.
Installing the Projector Ceiling Mount Assembly
2
C Pivot Bracket
B Adjustable Extension Column
A Ceiling Plate
Mounting to a Wooden Ceiling
3a
6
SKIP TO STEP 4
WARNING
Installers must verify that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
Using the marking template provided, mark holes for drilling. Make
sure at least two holes are on the centerline of the stud.
For concrete ceiling mounting, follow Step 3b.
For mounting to drywall, use toggle anchors
(not included).
3
Using a power drill and 3/16” drill bit, drill pilot holes of 3/16” (4.5 mm)
diameter and at least 2.5” (65mm) depth.
4
ø 4.5mm
65mm
65mm
(2.5")
(2.5")
(ø 3/16")
Using a straight edge, mark the centerline of the stud.
2
5
Using an edge-to-edge stud finder, find the edges of the stud.
1
W-C
W-A
centerline of the stud
centerline of the stud
Depending on the direction of
the studs, choose the mounting
holes accordingly.
Mount the ceiling plate and tighten
with the lag bolts (W-A) and washers (W-C)
using a socket wrench.
Installers are responsible for providing hardware for other types of mounting situations.
