To connect the 3-Inch NPT pipe to the mounted adapter plate, twist the male threaded end to
the female thread on the adapter. Using Allen Key (I), tighten screws (L or M) onto the pipe
and secure the position. Then pull the decorative cover (C) up the pipe to conceal the
adapter plate (E) for a neat look.
Decorative
Cover (C)
Installing the Pipe and Decorative Cover
2
Adapter Plate
Allen Key
(I)
Adapter Plate (E)
3
Disconnecting the Projector Plate from the Projector Mount
Connecting the Pipe to the Projector Plate
4
8
To connect the 3-Inch NPT pipe (D) to the projector plate,
twist the male threaded end of the pipe into the female
thread on the projector plate.
Allen Key
(I)
Set Screws (L)
Front
3-Inch NPT Pipe (D)
Projector Plate
Using Allen Key (I), insert and tighten set screws (L)
to secure the position.
7
3-Inch NPT Pipe (D)
Screws (L or M)
WARNING
Installers are responsible for providing hardware for other types of mounting situations.
Installers must verify that the supporting surface safely supports the combined weight of
the equipment and all attached hardware and components.
Projector Plate
Slide the projector plate out from the
projector assembly as shown on the
right to disconnect the projector plate
from the projector mount.
Projector Mount