Qualcast YT623105X), Instruction Manual

Page: 13 / 25

ASSEMBLY
Tube and Collection bag (continued)
2.
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
the upper tube (18) with
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
Connection to the
ASSEMBLY
Tube and Collection bag (continued)
2. Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
the upper tube (18) with
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
Connection to the
ASSEMBLY
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
the upper tube (18) with
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
Connection to the
ASSEMBLY
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
the upper tube (18) with
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
WARNING! Always use the product with its collection bag
yourself against dashed
collection bag or without one at all!
Connection to the
WARNING! For your safety, it is required that the plug attached to this pr
connected to
Always use a residual current supply (RCD) protected
ASSEMBLY
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
the upper tube (18) with
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
WARNING! Always use the product with its collection bag
yourself against dashed
collection bag or without one at all!
Connection to the
WARNING! For your safety, it is required that the plug attached to this pr
connected to
Always use a residual current supply (RCD) protected
ASSEMBLY
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
the upper tube (18) with
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
WARNING! Always use the product with its collection bag
yourself against dashed
collection bag or without one at all!
Connection to the
WARNING! For your safety, it is required that the plug attached to this pr
connected to
Always use a residual current supply (RCD) protected
ASSEMBLY
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
the upper tube (18) with
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
WARNING! Always use the product with its collection bag
yourself against dashed
collection bag or without one at all!
Connection to the
WARNING! For your safety, it is required that the plug attached to this pr
connected to
Always use a residual current supply (RCD) protected
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
the upper tube (18) with
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
WARNING! Always use the product with its collection bag
yourself against dashed
collection bag or without one at all!
Connection to the
WARNING! For your safety, it is required that the plug attached to this pr
connected to
Always use a residual current supply (RCD) protected
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
the upper tube (18) with
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
WARNING! Always use the product with its collection bag
yourself against dashed
collection bag or without one at all!
Connection to the
WARNING! For your safety, it is required that the plug attached to this pr
connected to the cord retainer
Always use a residual current supply (RCD) protected
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
the upper tube (18) with
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
WARNING! Always use the product with its collection bag
yourself against dashed
collection bag or without one at all!
Connection to the P
WARNING! For your safety, it is required that the plug attached to this pr
the cord retainer
Always use a residual current supply (RCD) protected
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
the upper tube (18) with
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
WARNING! Always use the product with its collection bag
yourself against dashed
collection bag or without one at all!
Power
WARNING! For your safety, it is required that the plug attached to this pr
the cord retainer
Always use a residual current supply (RCD) protected
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
the upper tube (18) with the
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
WARNING! Always use the product with its collection bag
yourself against dashed
collection bag or without one at all!
ower
WARNING! For your safety, it is required that the plug attached to this pr
the cord retainer
Always use a residual current supply (RCD) protected
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
the crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
WARNING! Always use the product with its collection bag
yourself against dashed debris and to avoid injuries! Do not use this product with a
collection bag or without one at all!
ower S
WARNING! For your safety, it is required that the plug attached to this pr
the cord retainer
Always use a residual current supply (RCD) protected
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop
WARNING! Always use the product with its collection bag
debris and to avoid injuries! Do not use this product with a
collection bag or without one at all!
Supply
WARNING! For your safety, it is required that the plug attached to this pr
the cord retainer
Always use a residual current supply (RCD) protected
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
A). Ensure the tubes lock in place.
3. Align the assembled tubes to the motor unit and insert them
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
in place. Attach the hanging loop (13) to the hook (16a).
WARNING! Always use the product with its collection bag
debris and to avoid injuries! Do not use this product with a
collection bag or without one at all!
upply
WARNING! For your safety, it is required that the plug attached to this pr
the cord retainer.
Always use a residual current supply (RCD) protected
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
3. Align the assembled tubes to the motor unit and insert them
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
(13) to the hook (16a).
WARNING! Always use the product with its collection bag
debris and to avoid injuries! Do not use this product with a
collection bag or without one at all!
upply
WARNING! For your safety, it is required that the plug attached to this pr
Always use a residual current supply (RCD) protected
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
3. Align the assembled tubes to the motor unit and insert them
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
(13) to the hook (16a).
WARNING! Always use the product with its collection bag
debris and to avoid injuries! Do not use this product with a
collection bag or without one at all!
upply
WARNING! For your safety, it is required that the plug attached to this pr
Always use a residual current supply (RCD) protected
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
3. Align the assembled tubes to the motor unit and insert them
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
(13) to the hook (16a).
WARNING! Always use the product with its collection bag
debris and to avoid injuries! Do not use this product with a
WARNING! For your safety, it is required that the plug attached to this pr
Always use a residual current supply (RCD) protected
Tube and Collection bag (continued)
Align the lower (16) to the upper tube (18) and insert it all the
3. Align the assembled tubes to the motor unit and insert them
crosshead screws (19) to the motor unit. (Fig.
Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
(13) to the hook (16a).
WARNING! Always use the product with its collection bag
debris and to avoid injuries! Do not use this product with a
WARNING! For your safety, it is required that the plug attached to this pr
Always use a residual current supply (RCD) protected
12
Align the lower (16) to the upper tube (18) and insert it all the
3. Align the assembled tubes to the motor unit and insert them
crosshead screws (19) to the motor unit. (Fig.
Fig. 3
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
(13) to the hook (16a).
WARNING! Always use the product with its collection bag
debris and to avoid injuries! Do not use this product with a
WARNING! For your safety, it is required that the plug attached to this pr
Always use a residual current supply (RCD) protected
Align the lower (16) to the upper tube (18) and insert it all the
3. Align the assembled tubes to the motor unit and insert them
crosshead screws (19) to the motor unit. (Fig.
3
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
(13) to the hook (16a).
WARNING! Always use the product with its collection bag
debris and to avoid injuries! Do not use this product with a
WARNING! For your safety, it is required that the plug attached to this pr
Always use a residual current supply (RCD) protected
Align the lower (16) to the upper tube (18) and insert it all the
3. Align the assembled tubes to the motor unit and insert them
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
(13) to the hook (16a).
WARNING! Always use the product with its collection bag
debris and to avoid injuries! Do not use this product with a
WARNING! For your safety, it is required that the plug attached to this pr
Always use a residual current supply (RCD) protected
Align the lower (16) to the upper tube (18) and insert it all the
3. Align the assembled tubes to the motor unit and insert them
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
(13) to the hook (16a).
WARNING! Always use the product with its collection bag
debris and to avoid injuries! Do not use this product with a
WARNING! For your safety, it is required that the plug attached to this pr
Always use a residual current supply (RCD) protected
Align the lower (16) to the upper tube (18) and insert it all the
3. Align the assembled tubes to the motor unit and insert them
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a
4. Align the connector (12a) on the collection bag (12) with the
(13) to the hook (16a).
WARNING! Always use the product with its collection bag
debris and to avoid injuries! Do not use this product with a
WARNING! For your safety, it is required that the plug attached to this pr
Always use a residual current supply (RCD) protected supply!
Align the lower (16) to the upper tube (18) and insert it all the
3. Align the assembled tubes to the motor unit and insert them
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
NOTE: Ensure that all screws are securely tightened with a suitable crosshead screwdriver.
4. Align the connector (12a) on the collection bag (12) with the
attached when operating it to protect
debris and to avoid injuries! Do not use this product with a
WARNING! For your safety, it is required that the plug attached to this pr
supply!
Align the lower (16) to the upper tube (18) and insert it all the
3. Align the assembled tubes to the motor unit and insert them all the way to the stop. Secure
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
suitable crosshead screwdriver.
4. Align the connector (12a) on the collection bag (12) with the
attached when operating it to protect
debris and to avoid injuries! Do not use this product with a
WARNING! For your safety, it is required that the plug attached to this pr
supply!
Align the lower (16) to the upper tube (18) and insert it all the way to the stop (Fig.
all the way to the stop. Secure
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
suitable crosshead screwdriver.
4. Align the connector (12a) on the collection bag (12) with the outlet nozzle (11)
attached when operating it to protect
debris and to avoid injuries! Do not use this product with a
WARNING! For your safety, it is required that the plug attached to this pr
way to the stop (Fig.
all the way to the stop. Secure
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
suitable crosshead screwdriver.
outlet nozzle (11)
attached when operating it to protect
debris and to avoid injuries! Do not use this product with a
WARNING! For your safety, it is required that the plug attached to this pr
way to the stop (Fig.
all the way to the stop. Secure
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
suitable crosshead screwdriver.
outlet nozzle (11)
attached when operating it to protect
debris and to avoid injuries! Do not use this product with a
WARNING! For your safety, it is required that the plug attached to this pr
way to the stop (Fig.
all the way to the stop. Secure
crosshead screws (19) to the motor unit. (Fig.
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
suitable crosshead screwdriver.
outlet nozzle (11)
attached when operating it to protect
debris and to avoid injuries! Do not use this product with a
WARNING! For your safety, it is required that the plug attached to this product is always
way to the stop (Fig.
all the way to the stop. Secure
crosshead screws (19) to the motor unit. (Fig. 3
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
suitable crosshead screwdriver.
outlet nozzle (11)
attached when operating it to protect
debris and to avoid injuries! Do not use this product with a
oduct is always
way to the stop (Fig.
all the way to the stop. Secure
3, detail B).
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
suitable crosshead screwdriver.
outlet nozzle (11)
attached when operating it to protect
debris and to avoid injuries! Do not use this product with a
oduct is always
way to the stop (Fig.
all the way to the stop. Secure
, detail B).
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must
disassembled, e.g. for removing blockages or replacing damaged tube parts!
suitable crosshead screwdriver.
outlet nozzle (11)
attached when operating it to protect
debris and to avoid injuries! Do not use this product with a
oduct is always
way to the stop (Fig.
all the way to the stop. Secure
, detail B).
WARNING! Once the tube has been completely assembled it may not be disassembled or
removed from the motor unit! Contact a qualified specialist in case the tube must be
suitable crosshead screwdriver.
outlet nozzle (11) and insert it
attached when operating it to protect
debris and to avoid injuries! Do not use this product with a
oduct is always
way to the stop (Fig. 3
all the way to the stop. Secure
, detail B).
WARNING! Once the tube has been completely assembled it may not be disassembled or
be
suitable crosshead screwdriver.
and insert it
attached when operating it to protect
dam
oduct is always
3, detail
all the way to the stop. Secure
, detail B).
WARNING! Once the tube has been completely assembled it may not be disassembled or
suitable crosshead screwdriver.
and insert it
attached when operating it to protect
damaged
oduct is always
, detail
all the way to the stop. Secure
WARNING! Once the tube has been completely assembled it may not be disassembled or
suitable crosshead screwdriver.
and insert it
attached when operating it to protect
aged
, detail
all the way to the stop. Secure
and insert it
attached when operating it to protect
aged
, detail
all the way to the stop. Secure
and insert it
attached when operating it to protect
aged