Qualcast XYM188-2BSJE, Assembly Manual, Page: 11 / 16

13 12
Customer Helpline 0845 034 2279
www.gardenservicecentre.co.uk
Customer Helpline 0845 034 2279
www.gardenservicecentre.co.uk
Operating the Lawnmower
Step 3 - Mowing (continued)
WARNING! Before you remove the grass bag, and assemble the side discharge chute, stop the
engine and wait until the blade stops completely.
To ensure that the cut grass can be scattered efficiently, do not cut high or wet grass. When you
have been cutting for several minutes, please stop the mower, and clean the blade and the deck.
Do not remove grass debris in the mower casing or on the blade by hand or with your feet.
Instead use suitable tools such as a brush or broom.
Step 4 - Emptying the Grass Bag
WARNING! Before you remove the grass bag, stop the engine and wait until the blade stops
completely.
WARNING!
Always empty the grass bag when you have finished the mowing, even if it is not full.
Stored grass residues are a fire hazard.
To remove the grass collection bag, raise the discharge flap with one hand and remove the grass
bag using its handle with your other hand.
To maintain safety, the discharge flap will close back to cover the mulching plug, when you
release the flap.
Empty the grass debris in the grass collection bag, and refit grass collection bag.
If any grass residues are caught in the discharge chute, clean it using a brush.
Do not remove grass debris in the mower casing or on the blade by hand or with your feet.
Instead use suitable tools such as a brush or broom.
To ensure that the cut grass can be collected into grass collection bag, the discharge opening
and inside the mower casing must be cleared of any blockage.
Operating the Lawnmower
Step 3 - Mowing (continued)
3.2a
3.2b
2. Mowing with mulching
When using the mulching, remove the collection grass bag(3.2a), and put the plastic mulching
plug into the rear discharge chute(3.2b).Then release the flap, it will close back to cover the
mulching plug.
WARNING! Before you remove the grass bag, stop the engine and wait until the blade stops
completely.
To ensure that the cut grass can be scattered efficiently, do not cut high or wet grass. When you
have been cutting for several minutes, please stop the mower, and clean the blade and the deck.
Do not remove grass debris in the mower casing or on the blade by hand or with your feet.
Instead use suitable tools such as a brush or broom.
3.3a
3. Mowing with side discharge
WARNING!
When using side discharge to throw grass, you first need remove the grass collection
bag (3.2 a) and insert the mulching plug (3.2 b).
Then raise the side safety flap with one hand, and hook the side discharge chute onto the mower
using the other hand. (3.3 a)
Release the safety flap.
Step 5- Stop the mower
Release the stop/start bar.