Qualcast XSZ53C-SD-E Assembly Manual Download Page 4

  

  

7

6

  

  

Customer Helpline 

01904 727500

www.gardenservicecentre.co.uk

Customer Helpline 

01904 727500

www.gardenservicecentre.co.uk

  

Step 3

Assembly

Lift the upper handle, and lock in place using the quick release lever and tensioning bolts that are 

attached to the handle.

Ensure the lower and upper handles are firmly connected.

Step 4

Assembly 

When using the grass collection bag, please ensure the mulching plug is removed before hooking 

the bag onto the mower. Ensure the side discharge chute is not fitted when collecting the grass in 

the bag.

Assemble the grass collection bag and attach the lift handle onto the grass bag frame.

Step 5

Ensure that the cables clips supplied are used to fix the cable to the lower handle.

  

Customer Helpline 01904 727500

Our dedicated UK based customer helpline is open 7 days a week to assist you with assembly, 

parts queries and technical support. We are open during office hours but you can always send an 

email via 

[email protected]

. Our experts are here to get you back enjoying 

your garden in no time. 

For useful assembly, starting and maintenance videos and ordering spares please visit  

www.gardenservicecentre.co.uk. 

Calling our service does not affect your statutory rights

UK/Ireland 01904 727500

Monday to Friday 9am – 5pm. Saturday & Sunday 11am – 4pm

www.gardenservicecentre.co.uk

email: [email protected]

Getting Help 

STOP! 

               

Do not start the engine before putting 600ml of SAE 30 oil into the engine. 

Failure to do so will result in irreparable damage to the engine and invalidate your warranty.

IMPORTANT!

 Make sure the grass collection box is in place before starting the engine.

Summary of Contents for XSZ53C-SD-E
















Reviews: