Qualcast XSZ48A-SD Assembly Manual Download Page 3

  

  

5

4

  

  

Customer Helpline 

0845 034 2279

www.gardenservicecentre.co.uk

Customer Helpline 

0845 034 2279

www.gardenservicecentre.co.uk

In the Box

Parts

Tools

A

D

C

B

WARNING!

 Always take care when removing the packaging to prevent damage to you or to the 

lawnmower. 

IMPORTANT! 

Before assembling the lawnmower, check all the parts indicated in the manual 

are in the box. Inspect all the parts for signs of damage. Do not assemble the lawnmower if you 
observe any damaged components.
1.  Remove all parts of the lawnmower from the box and carefully remove all packaging. Take 

care not to lose any instructions which may be attached to the parts. These provide important 

information which will be required while assembling the lawnmower.

2.   Keep all packaging until the lawnmower is fully assembled and has been operated successfully.

NOTE!

 Always recycle the packaging in accordance with local recycling schemes.

WARNING!

 This item requires a two person lift to remove from the packaging. Make sure that 

you have sufficient space to put the lawn mower down. Keep your feet apart so that you have a 

stable position, bend at the knees and keep your back straight.

Set the height adjustment to lowest position; fix the lower handle onto deck firmly.

WARNING!

 Make sure the rope guide is on the right handle, when you stand behind the mower.

Preparing to assemble the lawnmower

Assembly

Step 1

E

1

1a

1b

 

A

 Main mower deck 

(with upper handle)

 

B

 Grass collecting 

bag

 

C

 Cable clip 1pc

 

D

 Side discharge 

chute 1pc

 

E

 Plastic mulching 

plug 1pc (inside the 

mower)

 

F

 Lower handle

 

G

 Lower handle fixing 

knob with nut M8 

2pcs

 

H

 Quick release 2pcs

 

I

 Rope guide 1pc 

(attached to the 

lower handle)

1

 Socket spanner for 

spark plug 1pc

F

G

H

I

Summary of Contents for XSZ48A-SD

















Reviews: