Qualcast XSS41D Assembly Manual Download Page 21

  

14

  

Customer Helpline 

01904 727500

www.gardenservicecentre.co.uk

Maintenance 

Maintenance Schedule

Performing routine maintenance correctly on your lawnmower will ensure you get years of  

trouble free use.
Please keep this manual safe for future reference.
It is recommended that the following maintenance schedule is adhered to. This will ensure the 

lawnmower operated correctly and is safe to use.

after every use 12 hours of use 24 hours of use 36 hours of use

Cleaning

clean

clean

clean

clean

Air filter

clean

clean

replace

Spark plug

check

clean

replace

Engine oil

check

check

replace

check

Cutting blade

check

check

check

replace

The Engine oil should be changed after the first 5 hours.

Cleaning

WARNING!

 

- Before you tip the lawn mower onto its side, completely empty the fuel tank using a petrol 

suction pump. 
- Never turn the mower upside down.
- Before commencing any maintenance always disconnect the spark plug

- To ensure long life and good performance of the machine its important to keep the machine clean 

and well lubricated. Make sure the chute is clean and under the deck is cleared from wet debris. 

see also short term storage.
- Do not allow grass cuttings and other debris to become dry and hard on any of the mower 

surfaces. This will directly affect the cutting and grass collection performance. Make sure that the 

underside of the lawnmower deck is clean and clear.
- Never clean the lawn mower with a water jet or high-pressure cleaner. The engine must remain 

dry. Do not use aggressive cleaning agents such as cold cleaner or petroleum ether.

Summary of Contents for XSS41D




























Reviews: