Qualcast QSPP46 Instruction Manual Download Page 20

20

  Mowing with collection bag

WARNING!

 

Always observe the strictest safety procedures when using the lawn 

mower.

Start the engine and allow it to run. See ‘Step 2 - Starting the engine’.

Keep a firm grip on the upper handle and stop/start bar and clutch the propulsion lever, 

and walk along with it. Never run with the mower. Be very careful when mowing uneven or 

rough ground. Maintain a stable footing.

Mow across slopes, never up and down. Be careful when changing the direction of the 

mower on a slope. Do not use the mower on a steep slope of more than 15°.

NOTE:

The best result will be achieved if the grass is dry. Wet grass will tend to clog the blade and 

the grass collection system. 

Grass grows at different rates at different times of the year. Never use the lowest cutting 

height for the first cut of the season or in drought conditions. Only about one third of the 

grass height should be cut.

If the lawn mower will not collect the cuttings efficiently, the grass discharge chute may be 

blocked, the grass bag may be full, or the underside of the mower deck may be clogged.

  Emptying the grass bag

Raise the discharge flap with one hand and remove the grass bag using its handle 

with your other hand. To maintain safety, the discharge flap will close back to cover the 

mulching plug when you release the flap.

Empty the grass debris in the grass collection bag and refit the bag. If any grass residues 

are caught in the discharge chute, clean it using a nylon-bristled brush.

Summary of Contents for QSPP46






























Reviews: