manualshive.com logo in svg

Qualcast QGTP25, Original Instructions Manual

Share
Download
Qualcast QGTP25 Original Instructions Manual Download Page 13

13

 Fitting the belt

Place the harness so that it runs over the left shoulder, crossing the chest and back. 
In case of emergency, pull the rope of the quick-release mechanism. The metal locking bar 
will be released automatically from the securing clip.

WARNING! Always attach the product to the harness! Do not carry it 
only with your hands!

  

Preparation

 Filling with engine fuel

Danger of injury! Fuel is explosive! 
Turn off and cool the motor down before filling the tank with fuel. You must observe 
all safety instructions relating to handling fuel. 
Risk of device damage! 
The device is supplied without motor or gearbox oil. 
ATTENTION! Before operating, you must fill it with fuel. 

WARNING!

 Always switch the engine off before fuelling. Never add fuel to 

a machine with a running or hot engine. Move at least 30ft. (9m) from the 
refuelling site before starting the engine. Do not smoke! 

IMPORTANT! 

Keep the bottle flat while filling and use a funnel.

This product is powered by a 2-stroke engine and requires pre-mixing of petrol and 

2-stroke oil. Mix a high quality 2-stroke engine oil, according to JASO FC classic. Do not 
use automotive oil or 2-stroke outboard oil. DO NOT mix quantities larger than usable in a 

30-day period. 

Summary of Contents for QGTP25































Reviews:

No comments

Brands by name

Popular brands

Load more brands