background image

05

Helpline No. UK 0151 649 1500 / IRE 189 094 6244

Helpline No. UK 0151 649 1500 / IRE 189 094 6244

engine off immediately and examine 
the equipment. Never operate unit with 
damaged or defective equipment.

16.  Always trim or cut at high engine speeds. 

Do not run engine slowly at start or during 
trimming operations.

17.  Do not use equipment for purposes other 

than trimming or mowing weeds.

18.  Never raise the cutting head above knee 

height during operation.

19.  Do not operate unit with other people or 

animals in the immediate vicinity. Allow a 
minimum of 50 feet (15 meters) between 
operator and other people and animals 
when trimming or mowing. Allow a distance 
of 100 feet (30 meters) between operator 
and other people and animals when 
operating the petrol grass trimmer.

20.  If operating on a slope, stand below the 

cutting attachment. Do not operate on a 
slope or hilly incline if there is the slightest 
chance of slipping or losing your footing.

Additional instructions

1.  DO NOT USE ANY OTHER FUEL other than that 

recommended in your manual. Always follow 
instructions in the Fuel and Oil section of this 
manual. Never use petrol unless it is properly 
mixed with 2-stroke engine oil. Permanent 
damage to engine will result, voiding 
manufacturer’s warranty.

2.  DO NOT SMOKE while refueling or operating 

equipment.

3.  DO NOT OPERATE UNIT WITHOUT AN EXHAUST 

and properly installed exhaust shield.

4.  DO NOT TOUCH or let your hands or body 

come in contact with the exhaust. Hold unit 
with thumbs and fingers encircling the handles.

5.  DO NOT OPERATE UNIT IN AWKWARD 

POSITIONS, off balance, outstretched arms, 
or one-handed. Always use two hands when 
operating unit with thumbs and fingers 
encircling the handles.

6.  DO NOT RAISE THE LINE SPOOL above ground 

level while unit is operating. Injury to operator 
could result.

7.  DO NOT USE UNIT FOR ANY PURPOSES OTHER 

than trimming lawn or garden areas.

8.    DO NOT OPERATE UNIT FOR PROLONGED 

PERIODS. Rest periodically.

9.    DO NOT OPERATE UNIT WHILE UNDER THE 

INFLUENCE OF ALCOHOL OR DRUGS.

10.  DO NOT OPERATE UNIT UNLESS SAFETY GUARD 

IS INSTALLED AND IN GOOD CONDITION.

11.  DO NOT ADD, REMOVE OR ALTER ANY 

COMPONENTS OF THIS PRODUCT. Doing so 
could cause personal injury and/or damage 
the unit voiding the warranty.

12.  DO NOT operate your unit near or around 

flammable liquids or gases whether in or out 
of doors. An explosion and/or fire may result.

13.  DO NOT USE ANY OTHER CUTTING TOOLS.  

For your own safety only use the accessories 
and additional equipment specified 
in the operating manual. The use of 
tools or accessories other than those 
recommended in this operating manual 
may place you in danger of personal injury.

Safety when handling the blade

1. FOLLOW ALL WARNINGS and instructions for
using the machine and for installing the blade.
2. 

The blade may suddenly jump away out of 

control if it comes up against objects which 
it cannot cut through. This may result in 
Serious injury.

 Keep onlookers and animals at 

least 15 m away from where you are working. If 
the machine strikes a foreign body, stop the
engine immediately and bring the blade to a
standstill. Check the blade for signs of damage.

Always

 replace the blade if it is bent or damaged.

3. THE BLADE WILL THROW UP OBJECTS AT
HIGH SPEED: This may cause injuries to eyes,
face and legs. Always wear eye, face and leg
protection. Remove all objects from the working
area before using the blade. Keep other people
and animals at least 15 m away from the
machine in all directions.
4. 

Check your machine and other equipment

carefully for signs of damage.

 Do not use the

machine unless all the blade mountings have
been installed correctly.
5. THE BLADE WILL SLOW DOWN AND STOP IF
YOU RELEASE THE THROTTLE VALVE.
While it is slowing down, the blade can still 
cause injury to you or onlookers. Before you carry 
out any work on the blade, switch off the engine 
and make sure that the blade has stopped.
6. DANGER ZONE WITH A DIAMETER OF 15
METRES. Onlookers may suffer injuries. Keep
onlookers and animals at least 15 m away from
where you are working.

Summary of Contents for QG-BC 30

































Reviews: