background image

       Safety Information

Important - Please read these instructions fully before operating or maintaining

Customer Helpline 

01904 727500

www.gardenservicecentre.co.uk

IMPORTANT!

- Keep this instruction manual in a safe place for future reference.

- Read the instructions carefully. Be familiar with the controls and the proper use of the 
equipment.

- Never allow children or people unfamiliar with these instructions to use the pressure washer. 
Local regulations can restrict the age of the operator.

- Never use the machine while people, especially children, or pets are nearby. Keep in mind 
that the operator or user is responsible for accidents or hazards occurring to other people or 
their property.

- This appliance is not intended for use by persons (including children) with reduced physical, 
sensory or mental capabilities, or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance by a person responsible for 
their safety.

- Don’t use the appliance without reading the instruction sheet.

- Children should be supervised to ensure that they do not play with the appliance.

Personal Safety

WARNING!

- Risk of fatal injury!

Use special care when cleaning tyres. Vehicle tyres/tyre valves may become damaged or burst
when handled improperly. First signs of damage included discolorations on the tyre. Damaged
vehicle tyres/tyre valves pose a life-threatening risk. Keep the jet at a distance of at least 

30 cm!

- Never direct the jet against yourself or others in order to clean clothes or footwear.

- The appliance is not designed for connecting to tap water. If necessary, please use

only with a water backlow preventer or inlet hose-set approved by IEC 61770.

- Risk of injection or injury, do not direct discharge stream at persons.

- Do not use the appliance when there are other people around, unless they are also wearing 
safety equipment.

General Safety

Summary of Contents for Q1W-SP16-1900
























Reviews: