Customer Helpline
01904 727500
www.gardenservicecentre.co.uk
Step 2 - Stopping
1. Release the trigger, and replace the safety lock.
2. To switch the machine off, set the On/Off switch to OFF.
Step 3 – Use the high pressure lance
WARNING!
- Always turn off the machine when changing the high pressure lance.-The trigger gun is
subjected to a recoil force when the water jet is discharged. Make sure that you have a firm
footing and are also holding the trigger gun and spray lance with both hands.
1. Hold the hand-held spray lance and the jet tube firmly with both hands. Be aware of the
recoil when switching on the high-pressure jet.
2. Unlock the safety button and press the trigger on the handheld spray lance. It takes
approximately 5 seconds to release the high pressure.
NOTE!
- Clogging of the spray tips causes the pump pressure to be too high and cleaning is immedi-
ately required. You can clean the spray tips by carefully inserting a using the supplied cleaning
pin into the tip to remove deposits.
Operate the Pressure Washer
