GB • Printed in England • BA F 016 L69 881 • Powertrak 340 • OSW 02.10
Lawn Mower
Qualcast
Qualcast
Suffolk Punch
Power-Trak 34
Power-Trak 400
E34
Part number (typ)
F016 508 042
F016 511 042
F016 513 042
Rated power
1200 W
1700 W
1200 W
Maximum blade width
34 cm
40 cm
34 cm
Height of cut
20–70 mm
20–70 mm
20–70 mm
Grassbox capacity
40 l
50 l
40 l
Weight
12,0 kg
14,0 kg
12,5 kg
Protection class
/ II
/ II
/ II
Serial Number
See serial no.
21
(rating plate) on machine
This product is intended for domestic lawn
mowing.
This manual gives instructions on the correct
assembly and safe use of your machine. It is
important that you read these instructions
carefully.
When fully assembled the machine weighs
approximately 12 kg to 14 kg. If necessary,
obtain assistance to remove from packag-
ing.
Take care when carrying the mower to the
lawn, as the blades are sharp.
Carefully remove the machine from its pack-
aging and check that you have all the fol-
lowing items:
– Lawnmower with handle assembly
– 1 Handle bottom
– 2 Bolts
– 2 Wing nuts
– 2 Screws
– 2 Grassbox parts (3 for 40 models only)
– 2 Cable clips
– Operating instructions
When parts are missing or damaged, please contact
the consumer care hotline on (01449) 742130 for assist-
ance. We also have a network of Atco-Qualcast Ap-
proved Service Agents who you can contact for serv-
ice and advice both within and outside the period of
guarantee.
1
Switch lever
2
Safety button
3
Handle top
4
Mains plug**
5
Cable restraint**
6
Grassbox
7
Deflector guard
8
Handle bottom
9
Ventilation slots
10
Wheels
11
Height of cut lever
**Country specific
Not all of the accessories illustrated or described are
included as standard delivery.
Electrical Safety
Your machine is double insulated for safety
and requires no earth connection. The oper-
ating Voltage is 230 V ac, 50 Hz. Only use an
approved extension cable. Contact your
service agent for details.
Extension cords/leads should only be used if
they comply with H05VV-F or H05RN-F types.
It is recommended for increased electrical
safety to use a Residual Current Device
(RCD) with a tripping current of not more
than 30 mA. Always check your RCD every
time you use it.
Product Specification
Intended Use
Introduction
Delivered Items
Operating Controls
For Your Safety
Warning! Switch off, remove plug from mains
before adjusting, cleaning or if cable is cut,
damaged or entangled.
The blades continue to rotate for a few sec-
onds after the machine is switched off.
Caution - do not touch rotating blades.
F016 L69 881 - GB Seite 2 Freitag, 8. November 2002 9:25 09